How to Protect Your Camera From Sand?

Protect Camera From Sand

It is very nice to enjoy our camera when we are at the beach on many occasions. However, some beach components, such as sand and salt from the water, can be a problem for our camera. That is why here we mention the best ways to protect a camera from sand and other similar issues. 

Top 5 Ways to Protect your Camera from Sand

Places with beaches are usually one of the most chosen places to take pictures or record all kinds of videos. However, sand can be a significant inconvenience that no longer the camera’s lifespan. Here are the five best ways to protect your camera from the sand.

1. Use Rain Gear

Rain gear is very effective in protecting a camera. That same equipment keeps rain from being a problem and can also keep sand out of your camera. It’s simply a matter of keeping the lens and camera completely dry and insulated from the sand.

It is unnecessary to spend a large budget to purchase equipment that is useful for this type of lens. It may be more than enough to use a hotel shower cap, plastic bag, or another similar implement. Any of these items should be used to cover the entire camera completely. 

If the camera is to be used, a transparent and waterproof bag can be used. A transparent bag may be the best option to continue recording while the camera is fully protected inside the bag. This will prevent sand, water, and any other components from being a problem for the camera’s operation.

2. Avoid Too Many Lens Changes

Some camera components can serve as insulators for sand to get inside. Among all the cases, we can mention that lens change can be the perfect opportunity for sand grains to get inside. Sand can be one of the problems because saltwater could also enter if the person is on a beach.

Any of these components are more than enough to cause the camera to deteriorate quickly from the inside. When these components get into the contacts is the lens or the camera body, different functions will no longer be available in a short time. Of course, dust on the sensors is a problem that can be easily cleaned.

Here the real drawback is when all these components generate corrosion on the contacts. The only solution in such cases is to replace the camera. Once again, having a plastic bag is an excellent option if a lens change is to be made.

The camera should remain inside the plastic bag as insulation. Even working at a reasonable speed decreases the likelihood of sand getting inside the camera. The lens change should be done carefully to prevent any of the components from falling to the floor. This does not mean that the user should take too much time for this task.

The shorter the exposure time of the contacts and the camera, the less likely the connections will corrode. Therefore, some backup equipment should always be available for changing camera accessories.

3. Use a Filter to Protect the Lens

Many filters can be used to protect this part of the camera. Of course, it is unnecessary to incorporate a filter when the user is already using a neutral density filter or polarizing filter. When the user is not using these accessories and is on a windy day, it is recommended to use a UV filter.

Wind can be more than enough to track sand grains and other detrimental components to the camera. This means that the camera may be exposed to sand or salt, which can damage the integrity of the lens. Here it is possible to avoid replacing the glass after too much-accelerated wear due to sand and salt.

For this purpose, a filter in good condition must be used to provide reasonable protection. Filters also deteriorate with these components. However, the total cost of a filter is much lower than replacing a lens due to the cost of the glass.

4. Proper and Thorough Cleaning

It is recommended that a damp cloth be used to apply proper cleaning and maintenance to the camera once sand is no longer present. Both the lens and the camera body should be clean, and a damp cloth should be sufficient. Here, it is essential to pay attention to traces of sand and white spots.

There are usually white spots on a camera, and this is a clear presence of salt. Therefore, salt should be removed entirely as it is one of the most corrosive components of a camera. However, a series of additional steps should be considered if the chamber has been impacted for an hour.

Each of the parts should be left next to efficient ventilation overnight. To do this, the battery should be removed and the lens disconnected. The following day you should already notice that each of the parts is dry with proper ventilation. The same thoroughly clean damp cloth should be used to remove all traces of salt in that case.

If there are still salt deposits inside the camera body, it is advisable to have an expert help you. Although this is not very common, it is recommended that an expert perform a complete cleaning before a beginner can make mistakes.

5. Moisture Removal

Moisture in a chamber should be removed as quickly as possible. Any drop of water that gets inside the camera is a great danger to the overall performance. A microfiber cloth may be the best option to carry with the camera at all times. 

Tips for Maintaining the Camera

The following tips can be easily applied to extend the camera’s lifespan.

  • Do not use compressed air for cleaning
  • Avoid any liquids
  • Please do not touch the lens or LCD screen unless it is a touch screen.
  • Do not point the camera towards the sun
  • Vacuum and clean the camera bag thoroughly.
  • Keep the camera at a stable temperature
  • Always use wrist straps and neck straps
  • Store the camera in a cool, dry place.
  • Clean the entire structure with a damp cloth and a dry cloth.

Conclusion:

Fully maintaining and caring for a camera can be very easy once you know the pitfalls. These tips are much more critical for a professional camera or a camera with great technology. Taking care of your camera’s lifespan will be much easier once you have read this article.

James Pattinson is a professional photographer who likes to write about what he experiences. He loves to share his honest review with people about photography equipment such as cameras, tripods, lenses, etc.

We will be happy to hear your thoughts

Leave a reply

TripodsDslr
Logo
Enable registration in settings - general